Europe based Mega-Store of RC Helicopters, Drones, Planes
New Arrivals
Heavy Duty Ball Links with ball M4 rod, Ball hole M3, 22mm Long, Set of 10
This is a set of Heavy-Duty Ball Links for use with M4 Threaded Rods. For heavy duty Applications, Made from self Lubricated POM, perfect for UAV, Airplanes, Cars, Boats and Industrial Applications.
|
€8.90
Inc. VATHeavy Duty Ball Links with ball M4 rod, Ball hole M3, 28mm Long, Set of 10
This is a set of Heavy-Duty Ball Links for use with M4 Threaded Rods. For heavy duty Applications, Made from self Lubricated POM, perfect for UAV, Airplanes, Cars, Boats and Industrial Applications.
|
€8.90
Inc. VATHeavy Duty Ball Links with ball M4 rod, Ball hole M3, 25mm Long, Set of 10
This is a set of Heavy-Duty Ball Links for use with M4 Threaded Rods. For heavy duty Applications, Made from self Lubricated POM, perfect for UAV, Airplanes, Cars, Boats and Industrial Applications.
|
€8.90
Inc. VATBalance Expansion Board, Parallel Charging Board Connector MX3.0 up to 12S XH for industrial chargers
Balance Expansion Board, Parallel Charging Board Connector MX3.0 up to 12S XH for industrial chargers Please note- verify always the connectors to the chargers, some chargers brands changing the wire layout! |
€20.00
Inc. VATTNC Male Connector to SMA Male Coaxial Extension Cable 35Cm long RG316 coax
Extension Cable for Antenna , TNC male on one side- SMA male on other side. Best cable for UAV needs An easy way to add the flexibility you need, this flexible adapter cable is an easy and effective way to adapt your FPV-UAV system with simplicity & ease. Utilizing a flexible cable system, this cable allows you to bend your antenna to the most optimal angle, allowing your FPV experience to be maximized with effective range. Easy to use and a great way to adapt your differing SMA connector types, use this flexible system for a quick and easy solution that gives your FPV system the flexibility it deserves! Length +-35cm |
€19.00
Inc. VATAntenna 868-900MHz 2dBi Monopole Angled version (SMA)
RFDesign Antenna 868-900MHz 2dBi Monopole (SMA) 868-900MHz quarter wave mono-pole antenna with SMA connector- Pin |
€7.90
Inc. VATServo Cable Grommet , set of 5, black
Grommet to Allow flexible connection to servo but not only, fits perfectly for servo wire. Set of 5 pcs. |
€3.50
Inc. VATOS Engines 91HZ-R 3D Speed Black Helicopter engine w/61G carburetor #18642
This is the O.S. .91 HZ-R 3D Speed Competition 3D Helicopter Engine, with 61G carburetor. O.S. has taken high-performance, high-speed helicopter engines to the next stage of evolution with the introduction of the 91HZ-R 3D Speed. This engine offers unique features that give pilots a distinct advantage in 3D competition, like the Demand Regulator System, which supplies the carburetor with a consistent fuel supply regardless of the level of fuel in the tank, or the attitude of the helicopter. A re-designed combustion chamber has been shaped to match the big bore carburetor and advanced exhaust cylinder timing providing optimum performance, while the lightweight, CNC machined cooling head and black anodized crankcase provides efficient cooling in the harshest conditions.
Specifications: |
€469.99
Inc. VATFeatured Products
TBS Crossfire Micro TX V2 STARTER Set Long range,Low Latency
The TBS CROSSFIRE is a long range R/C link based on the newest RF technology, capable of self-healing two-way communications and range beyond comprehension. With a sensitivity of -130dB, full RF-side diversity, tiny receivers for FPV quads, the TBS CROSSFIRE contains the most modern technology to provide a superior long range control link The Crossfire Micro TX borrows the core technology from its larger brother, but is a JR-module transmitter simplified to the most sought-after features, at a killer price! For people looking to do extreme long range flights beyond 15-20km, the Crossfire TX is still the way to go. For anyone looking to penetrate buildings, fly mini quads or just explore your surroundings a few kilometers away, the Micro TX is the perfect companion. It will still go out up to 40km, just like its bigger brother. But it costs less than half the price. Features:
Package includes
|
€199.99
Inc. VATUAVsystems Fireproof LiPo carry and storage Safe Bag for 12s-14s 340mm long
The LiPo Safe sack/bag is a hi-tech bag made of space-age materials that has the ability to contain a lithium polymer battery fire or charging mishap. Place your lithium polymer battery inside the LiPo Safe and extend the charging wires through the top flap. Charge the lipo batteries when they’re in the LiPo Safe for peace of mind and greater safety. In the case of a lithium polymer battery charging mishap, the LiPo Safe’s fire-resistant material mitigates the ferocity of the LiPoly blaze inside and vents the smoke outside the LiPo Safe. Before using the LiPo Safe you must read and understand the LiPo Safe Safety Instructions. We assume absolutely no liability for any damages of any kind - even with proper use. When using the LiPo Safe, you must always remember to abide by safe lithium polymer battery charging and safety rules and never leave charging li-polymer batteries unattended. Never leave damaged lipos unattended. Always use the LiPo Safe on a non-flammable surface and in a ventilated area. Avoid damage to the LiPo Safe and not use the LiPo Safe if it is damaged. Instructions to use: Ensure that charger rate is properly set and polarity is correct
Please check the Video showing the use of Lipo Safe |
€14.99
Inc. VATRCPROPLUS REB 6808 Pro D6 P8 TWIN SQUARE SUPRA-X REB6808 PRO D6 6mm Bullet Connector 8 Pairs
This is a pack of 8 RCPROPLUS SUPRA-X REB6808 PRO D6 6mm Bullet Connector Set including 8 PAIRS.
Cover material:IDEMITSU plastic |
€35.90
Inc. VATFPV x230 Racer With Gimbal ,1080P Wide Angle HD Camera RC Quadcopter RTF
FPV x230 Racer With Gimble,1080P Wide Angle HD Camera RC Quadcopter RTF
Remote control:
Package Included:
|
€359.00
Inc. VATZD-937/B/ESD Digital regulated Soldering Station, pre-selection buttons
Soldering Station ZD-937, black, 150°C - 450°C, 48W,ESD-protection, with pre-selection buttons 100, 200, 300°C. The station is ideal for home elektronics, school, workshop, service, production and lab. Among the easy and quick temperature adjustment with the up-/down-buttons in 1°C- and 10°C-steps, it is possible to pre-select 100°C, 200°C and 300°C with the related button.
Technical Specification:
Delivery:
|
€59.90
Inc. VAT10 Piece Combination Spanner Set 4-11mm
This "economy" spanner set includes just about all the sizes you will ever need on a model heli. |
€24.00
Inc. VATCustom assembled TITAN DC5 HD v1.4 Compatible with DJI Air Unit PNP
TITAN DC5 w/ DJI Air Unit BNF built for the amazing new DJI FPV system, this quad makes flying FPV truly breathtaking. With the 720p video shown at 120fps through the goggles, DJI has set the bar at a new high for clarity and image quality in an FPV system. This TITAN DC5 BNF is 5 inch quad which is no prop in view, equipped SucceX-D F7(50A 4-in-1 ESC) Stack and popular XING motor, everything you just need to bind and fly! You can use Any radio you want, you will need to add your receiver and bind and calibrate it. If you use your own DJI Remote Controller, you need to update beta-flight to 10.6.0 to set up and bind your DJI remote controller. ELECTRONICS // SucceX-D F7 Stack (50A 4-in-1 ESC):
BNF // Parts lists
|
€330.00
Inc. VATSky hero Anakin Club FPV racer 215-5’’ ARF combo w.radio
Sky hero Anakin Club FPV racer 215mm -5"’’ ARF combo, Our combo delivered with Best components we beleive are on the market today. We beleive that quality assembly can be done by customer, there are a lot of advantages to do so.
Not included:
Sky hero did it again, with the latest drone technology, you have the possibility to fly the freedom of birds. General specs of Club racer versions.
ESSENTIALS
KEY FACTORS
|
€359.00
€229.00
36% Off Inc. VAT
10K+ Products In Stock
Competitive Prices
Same Day Dispatch